GeekRadar / The comparison desk
COMPARE.
Image sensorsOmniVision OX01E10
Image sensor
- Optical format
- Reported value 1: 1/3.55"*Reported value 2: 1/3,55*Reported value 3: 1/3,55*
- Sensor technology
- Reported value 1: HDR,PureCel®Plus*Reported value 2: HDR,PureCel®Plus*Reported value 3: HDR, PureCel®Plus*
The sensor, in perspective.
Capture area at a shared scale. The dashed outline is a 36 × 24 mm full-frame reference.
OmniVision OX01E10
- Sensor area indexGeometric · full frame = 100From declared pixel array and pixel size.
- 1.4*
- Active dimensions
- 4.02* × 3.06* mm
- Active area
- 12.30* mm²
- Crop factor
- 8.56* ×
- Area vs full frame
- -6.13* stops
The index is calculated from area, assuming equal scene illumination, f-number and exposure time. It is not a low-light test or an image-quality score: lens transmission, quantum efficiency, noise and processing are not included. A crop mode changes the area used, not the physical sensor.
Dynamic range ≠ EV operating range. Autofocus and metering limits describe operating conditions. Manufacturer HDR claims appear separately below; independent dynamic-range measurements require a matched test method, ISO and noise threshold.
Sensor specifications
- Declared sensor resolution
- 1.30 MP*
- Declared pixel size
- 3 µm*
- Optical format
- Reported value 1: 1/3.55"*Reported value 2: 1/3,55*Reported value 3: 1/3,55*
- Sensor technology
- Reported value 1: HDR,PureCel®Plus*Reported value 2: HDR,PureCel®Plus*Reported value 3: HDR, PureCel®Plus*
Capture & exposure
- Shutter
- Rolling*
System configuration
Detailed specifications
Specifications 1 · 20 fields
- Declared sensor resolution
- 1.3* MP
Scope and conditions
- Scope
- Native active pixel count unspecified*
- Declared sensor resolution
- 1.3* MP
Scope and conditions
- Scope
- Native active pixel count unspecified*
- cfa
- Color*
- cfa
- Color*
- declared interfaces
- DVP*
- declared interfaces
- MIPI*
- declared output format
- BT656,RAW,RGB888,YUV*
- declared output format
- BT656,RAW,RGB888,YUV*
- declared package options
- CSP*
- declared package options
- CSP*
- Declared pixel size
- 3.0* µm
Scope and conditions
- Scope
- Native or binned mode unspecified*
- Declared pixel size
- 3.0* µm
Scope and conditions
- Scope
- Native or binned mode unspecified*
- manufacturer capability max frame rate
- value
- 30.0*
- unit
- fps*
- scope
- Supplier capability, not an independently measured benchmark or proven mode/bit-depth combination*
- manufacturer capability max frame rate
- value
- 30.0*
- unit
- fps*
- scope
- Supplier capability, not an independently measured benchmark or proven mode/bit-depth combination*
- nominal optical type
- 1/3,55*
- nominal optical type
- 1/3,55*
- shutter
- Rolling*
- shutter
- Rolling*
- technology
- HDR,PureCel®Plus*
- technology
- HDR,PureCel®Plus*
Specifications 2 · 22 fields
- Native active array and pixel pitch
- modes
- label
- Native active array*
- active_array
- horizontal
- 1,340*
- vertical
- 1,020*
- unit
- pixels*
- native_pixel_pitch
- horizontal
- 3.0*
- vertical
- 3.0*
- unit
- µm*
- Brief active array size
- role
- active_array*
- horizontal
- 1,340*
- vertical
- 1,020*
- unit
- pixels*
- Brief image area
- role
- manufacturer_image_area_not_assumed_active*
- horizontal
- 4,080.0*
- vertical
- 3,108.0*
- unit
- µm*
- Brief lens chief ray angle
- declaration
- 20° non-linear*
- conditions
- 20° non-linear*
- Brief lens size
- declaration
- 1/3.55"*
- conditions
- 1/3.55"*
- Brief maximum image transfer rate
- declaration
- - 1340 x 1020 in 10-bit: 30 fps*
- conditions
- 1340 x 1020 in 10-bit: 30 fps*
- Brief output formats
- declaration
- - linear output - dual exposure HDR (long and short) - 3-exposure HDR (long, short, and very short)*
- conditions
- linear output*
- dual exposure HDR (long and short)*
- 3-exposure HDR*
- (long, short, and very short)*
- Brief output interfaces
- declaration
- up to 2-lane MIPI CSI-2 and 96 MHz parallel clock*
- conditions
- up to 2-lane MIPI*
- CSI-2 and 96 MHz parallel clock*
- Brief pixel size
- role
- native_unit_cell_pitch*
- horizontal
- 3.0*
- vertical
- 3.0*
- unit
- µm*
- Brief power requirements
- declaration
- - active: 335 mW/315 mW (streaming 1340 x 1020 @ 30 fps YUV DVP/MIPI typical) - active: 315 mW/300 mW (streaming 1280 x 960 @ 30 fps YUV DVP/MIPI typical) - active: 270 mW/260 mW (streaming 1280 x 720 @ 30 fps YUV DVP/MIPI typical)*
- conditions
- active: 335 mW/315 mW*
- (streaming 1340 x 1020 @ 30 fps*
- YUV DVP/MIPI typical)*
- active: 315 mW/300 mW*
- (streaming 1280 x 960 @ 30 fps*
- YUV DVP/MIPI typical)*
- active: 270 mW/260 mW*
- (streaming 1280 x 720 @ 30 fps*
- YUV DVP/MIPI typical)*
- Brief power supply
- declaration
- - analog: 3.3V - digital: 1.1V - I/O pins: 1.8V or 3.3V*
- conditions
- analog: 3.3V*
- digital: 1.1V*
- I/O pins: 1.8V or 3.3V*
- Brief scan mode
- declaration
- progressive*
- conditions
- progressive*
- Brief temperature range
- declaration
- - operating: -40°C to +105°C sensor ambient temperature and -40°C to +125°C junction temperature*
- conditions
- operating: -40°C to +105°C sensor*
- ambient temperature and -40°C to*
- +125°C junction temperature*
- Catalogue CFA (Chroma)
- Color*
- Catalogue Frame Rate
- Full readout; bit depth and interface unspecified 30.0* fps
- Catalogue Interface
- DVP*
- MIPI*
- Catalogue Optical Format
- 1/3.55"*
- Catalogue Output Format
- BT656*
- RAW*
- RGB888*
- YUV*
- Catalogue Package
- a‑CSP™*
- Catalogue Pixel Size
- 3.0* um
- Catalogue Resolution
- 1.3* MP
- Catalogue Technology
- HDR*
- PureCel®Plus*
0 selected Compare 0
* Provisional data